Dixon® DM6 Hose Mender, 3/4 in, Hose Shank, Steel, Domestic
10822803
MFG #: DM6
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Fitting/Connector Type: Coupling, Mender
- Nominal Size: 3/4
- End Style: Hose Shank
- Length: 4-1/32
- Material: Steel
- Finish: Zinc Plated
- Dimensions: 25/32 in Dia
- Domestic/Import: Domestic
Dixon® Hose Mender, Fitting/Connector Type: Coupling, 3/4 in Nominal, Hose Shank End Style, 4-1/32 in Length, Steel, Zinc Plated, 25/32 in Dia, Domestic
- Hose mender for repairing hoses
- Hose mender for repa
- Connects to a hose on both ends
- Connects to a hose o
- Zinc plated steel for greater corrosion resistance than unplated steel
- Zinc plated steel fo
- Barbed fitting for a tight seal on hoses
- Barbed fitting for a
- Not for compressible products such as air, nitrogen, or steam
- Not for compressible
- For use with a hose clamps or crimp sleeve or ferrule
- For use with a hose
- Menders are not for compressible products such as air, nitrogen or steam
- Menders are not for
- The working pressure may vary with the construction of the hose, the type of clamping syst
- The working pressure
- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled lengt
- In accordance with t
- Warning: this product contains a chemical known to the state of California to cause birth
- Warning: this produc
- Do not use in connection with drinking water
- Do not use in connec
- Wash hands after handling
- Wash hands after han
Hose mender for repairing hoses
Hose mender for repairing hoses
Connects to a hose on both ends
Connects to a hose on both ends
Zinc plated steel for greater corrosion resistance than unplated steel
Zinc plated steel for greater corrosion resistance than unplated steel
Barbed fitting for a tight seal on hoses
Barbed fitting for a tight seal on hoses
Not for compressible products such as air, nitrogen, or steam
Not for compressible products such as air, nitrogen, or steam
For use with a hose clamps or crimp sleeve or ferrule
For use with a hose clamps or crimp sleeve or ferrule
Menders are not for compressible products such as air, nitrogen or steam
Menders are not for compressible products such as air, nitrogen or steam
The working pressure may vary with the construction of the hose, the type of clamping system used and the application
The working pressure may vary with the construction of the hose, the type of clamping system used and the application
In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement
In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement
Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
Do not use in connection with drinking water
Do not use in connection with drinking water
Wash hands after handling
Wash hands after handling