Alvin Products Lab-metal® 10102 Metal Repair and Patching Compound, 24 oz Can, Paste Form, Gray, 1.73
ALVIN 10102
MFG #: 10102
$0.00
/ Each
In Stock
- Container Type: Can
- Container Size: 24
- Composition: 50 to 60% Aluminum Powder, 5 to 10% Methyl Ethyl Ketone, 5 to 10% Toluene
- Form: Paste
- Drying Time: 1 to 2
- Color: Gray
- Odor/Scent: Solvent
- Temperature Rating: 350 to 425
- Specific Gravity: 1.73
- Flash Point: 23 to 45
- VOC Content: 2.74
- Viscosity Rating: 2500 cSt at 40 deg C
- Applicable Materials: Metal, Wood, Glass, Plaster, Porcelain and Hard Plastic
- Tensile Strength: 650
Alvin Products Lab-metal® Metal Repair and Patching Compound, Can Container, 24 oz Container, Composition: 50 to 60% Aluminum Powder, 5 to 10% Methyl Ethyl Ketone, 5 to 10% Toluene, Paste Form, 1 to 2 hr Drying, Gray, Solvent Odor/Scent, 350 to 425 deg F, 1.73 Specific Gravity, 23 to 45 deg F Flash Point, 2.74 lb/gal VOC, 2500 cSt at 40 deg C Viscosity, Applicable Materials: Metal, Wood, Glass, Plaster, Porcelain and Hard Plastic, 650 lb/sq-in Tensile Strength
- Lab-metal® fills den
- Apply Lab-metal® rig
- No two-component mix
- Heat, special tools
- Many applications ma
- Lab-metal® may be th
- Lab-metal® adheres t
- Its strong bond with
- Lab-metal® hardens q
- Once hardened, Lab-m
- Filing, sanding or g
- Lab-metal® will not
- Not affected by mild
- Lab-metal® is alumin
- Lab-metal® withstand
- Lab-metal® stands up
- Lab-metal®'s true me
- Lab-metal® sells for
- Its strength, hardne
- Lab-metal® is the re
Lab-metal® fills dents and flaws in metal and nonmetal parts easily and economically
Apply Lab-metal® right from the can with a putty knife or similar tool
No two-component mixing or measuring is necessary, therefore there is no waste
Heat, special tools and specialized skill are unnecessary
Many applications may be made from a single can
Lab-metal® may be thinned to paint consistency with Lab-solvent® and brushed or sprayed on practically any surface to provide a rustproof, water resistant, hard metal finish
Lab-metal® adheres to any clean and dry metal, wood, glass, plaster, porcelain and hard plastic surface
Its strong bond withstands vibration and other difficult conditions
Lab-metal® hardens quickly without heat, providing a durable metal surface
Once hardened, Lab-metal® can be milled, chiseled, drilled, sawed, tapped and machined
Filing, sanding or grinding Lab-metal® to a feather edge provides a smooth metallic repair
Lab-metal® will not shrink, crack or peel
Not affected by mild acids, gasoline, oil or petroleum solvents
Lab-metal® is aluminum filled, resisting attack of rust, rot and mildew
Lab-metal® withstands temperatures as high as 350 deg F (and as low as -40 deg F) and when hard, can be painted with lacquer or enamel without danger of bubbling, lifting paint, chipping or peeling
Lab-metal® stands up to normal paint baking procedures and may also be powder coated
Lab-metal®'s true metal hardness is achieved with greater ease than other materials sold for repair and finishing
Lab-metal® sells for considerably less than epoxy systems
Its strength, hardness, durability and abrasion resistance surpass basic requirements for fillers set by the nation's largest metalworking plants
Lab-metal® is the repair putty of choice because of its extensive can life, ready-to-use formulation, versatility of applications and durability