DeWALT® Screw-Bolt+™ PFM1411100 High Performance Screw Anchor, 1/4 in Dia, 3 in OAL, Hex Head Drive, Steel, 1 in D Min Embedment
07801927
MFG #: PFM1411100
$0.00
/ Each
In Stock
- Type: High Performance
- Diameter: 1/4
- Overall Length: 3
- Head Drive Type: Hex
- Material: Steel
- Minimum Embedment Depth: 1
- Drill Size: 1/4
- Finish: Zinc Plated
- Applicable Materials: Normal Weight Concrete/Sand Lightweight Concrete/Concrete Over Steel Deck/Concrete Masonry/Solid Clay Brick
- Head Size: 7/16
- Maximum Work Thickness: 2
- Shear Strength: 1600/1755/1910/2080
- Tensile Strength: 1325/1400/1530/1725
DeWALT® Screw-Bolt+™ Screw Anchor, High Performance, 1/4 in Diameter, 3 in Overall Length, Hex Head Drive, Steel, 1 in Minimum Embedment Depth, 1/4 in Drill, Zinc Plated, Applicable Materials: Normal Weight Concrete/Sand Lightweight Concrete/Concrete Over Steel Deck/Concrete Masonry/Solid Clay Brick, 7/16 in Head, 2 in Maximum Work Thickness, 1600/1755/1910/2080 lb Shear Strength, 1325/1400/1530/1725 lb Tensile Strength
- Designed for standard ANSI tolerance drill bits
- Tough threads for tapping high strength concrete
- Can be installed closer to the edge than traditional expansion anchors
- Fast installation with powered impact wrench
- 1-piece, finished head design
- Patented thread design offers low installation torque
- Ratchet teeth on underside of hex washer head lock against the fixture
- Fully removable and re-installable in same hole
- Diameter, length and identifying marking stamped on head of each anchor
- 1600/1755/1910/2080/2080 lb at 2500/3000/4000/6000/8000 psi in normal weight concrete shea
- 1325/1400/1530/1725/1725 lb at 2500/3000/4000/6000/8000 psi in normal weight concrete tens
Designed for standard ANSI tolerance drill bits
Tough threads for tapping high strength concrete
Can be installed closer to the edge than traditional expansion anchors
Fast installation with powered impact wrench
1-piece, finished head design
Patented thread design offers low installation torque
Ratchet teeth on underside of hex washer head lock against the fixture
Fully removable and re-installable in same hole
Diameter, length and identifying marking stamped on head of each anchor
1600/1755/1910/2080/2080 lb at 2500/3000/4000/6000/8000 psi in normal weight concrete shear strength
1325/1400/1530/1725/1725 lb at 2500/3000/4000/6000/8000 psi in normal weight concrete tensile strength