DeWALT® 7415SD1-PWR SD1 Expansion Wedge Anchor, 3/8 in Dia, 3-3/4 in OAL, 2-3/8 in L Thread, Carbon Steel, Zinc Plated
08337334
MFG #: 7415SD1-PWR
$0.00
/ Box of 50
In Stock
- Type: Expansion
- Series: SD1, Wedge-All®
- Diameter: 3/8
- Overall Length: 3-3/4, 3-3/4 in
- Thread Length: 2-3/8, 2-3/8 in, 2-5/8
- Material: Carbon Steel
- Finish: Zinc Plated
- Minimum Embedment Depth: 1-3/4, 1-5/8, 1-5/8 in
- Head Size: 9/16
- Drill Size: 3/8
- Head Type: Threaded Stud
- Thread Size: 3/8-16, 3/8-6
- Thread Type: UNC
- Maximum Work Thickness: 1-3/4
- Shear Strength: 2540, 2540 lb, 570
- Tensile Strength: 261, 2685, 2685 lb, 3100
DeWALT®, 7415SD1-PWR, Expansion Wedge Anchor, Series: SD1, 3/8 in Diameter, 3-3/4 in Overall Length, 2-3/8 in Thread Length, Carbon Steel, Zinc Plated, 1-5/8 in Minimum Embedment Depth, 3/8-16 Thread, Threaded Stud Head, UNC Thread, 1-3/4 in Maximum Work Thickness, 2540 lb Shear Strength, 3100 lb Tensile Strength
- Anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed fo
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Anchor can be instal
- Suitable base materials include normal-weight concrete, structural sand-lightweight
- One-piece, wrap-around clip ensures uniform holding capacity
- Anchor design allows
- 2540 lb ultimate load, 2540 lb 3000 psi concrete, 2540 lb 4000 psi concrete
- Threaded end is chamfered for ease of starting nut
- 2540 lb ultimate loa
- Nominal drill bit di
- 2685 lb, 2685 lb 3000 psi concrete, 3100 lb 4000 psi concrete
- Available in a wide range of diameters and lengths
- 2685 lb, 2685 lb 300
- Length ID code and i
- Carbon steel ASTM A563 grade A nut
- Ultimate load capaci
- The minimum concrete thickness is 1-1/2 times the embedment depth
- Anchor is a fully th
- The allowable loads are based on a safety factor of 4
- Suitable base materi
- 7/16 in minimum fixture hole
- 30 ft-lb installation torque
- 1560 lb at 2000 psi/2880 lb at 4000 psi ultimate tension loads and 390 lb at 2000 psi, 555
- 2280 lb at 2000 psi ultimate shear loads and 570 lb at 2000/3000/4000 psi allowable shear
- Anchor body material meets minimum 70000 psi tensile strength
Anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete
Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
Anchor can be installed through standard fixture holes
Suitable base materials include normal-weight concrete, structural sand-lightweight
One-piece, wrap-around clip ensures uniform holding capacity
Anchor design allows for follow-up expansion after setting under tensile loading
2540 lb ultimate load, 2540 lb 3000 psi concrete, 2540 lb 4000 psi concrete
Threaded end is chamfered for ease of starting nut
2540 lb ultimate load, 2540 lb 3000 psi concrete, 2540 lb 4000 psi concrete
Nominal drill bit diameter same as Anchor diameter
2685 lb, 2685 lb 3000 psi concrete, 3100 lb 4000 psi concrete
Available in a wide range of diameters and lengths
2685 lb, 2685 lb 3000 psi concrete, 3100 lb 4000 psi concrete
Length ID code and identifying marking stamped on head of each Anchor
Carbon steel ASTM A563 grade A nut
Ultimate load capacity - 2240 lb tensile strength when embedded in 2500 psi, 2685 lb tensile strength when embedded in 3000 psi, 3100 lb tensile strength when embedded in 4000 psi normal-weight concrete
The minimum concrete thickness is 1-1/2 times the embedment depth
Anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete
The allowable loads are based on a safety factor of 4
Suitable base materials include normal-weight concrete, structural sand-lightweight
7/16 in minimum fixture hole
30 ft-lb installation torque
1560 lb at 2000 psi/2880 lb at 4000 psi ultimate tension loads and 390 lb at 2000 psi, 555 lb at 3000 psi, 720 at 4000 psi allowable tension load for concrete
2280 lb at 2000 psi ultimate shear loads and 570 lb at 2000/3000/4000 psi allowable shear load for concrete
Anchor body material meets minimum 70000 psi tensile strength