DeWALT® 7423SD1-PWR SD1 Expansion Wedge Anchor, 1/2 in Dia, 4-1/2 in OAL, 2-3/4 in L Thread, Carbon Steel, Zinc Plated
DEWALT 7423SD1-PWR
MFG #: 7423SD1-PWR
$0.00
/ Box of 50
In Stock
- Type: Expansion
- Series: SD1
- Diameter: 1/2
- Overall Length: 4-1/2
- Thread Length: 2-3/4
- Material: Carbon Steel
- Finish: Zinc Plated
- Minimum Embedment Depth: 2-1/4
- Drill Size: 1/2
- Head Type: Hex, Threaded Stud
- Thread Size: 1/2-13
- Head Style: Hex
- Thread Type: UNC
- Maximum Work Thickness: 1-3/4
- Shear Strength: 4195
- Tensile Strength: 4155, 4800
DeWALT®, 7423SD1-PWR, Expansion Wedge Anchor, Series: SD1, 1/2 in Diameter, 4-1/2 in Overall Length, 2-3/4 in Thread Length, Carbon Steel, Zinc Plated, 2-1/4 in Minimum Embedment Depth, 1/2 in Drill, 1/2-13 Thread, Threaded Stud Head, UNC Thread, 1-3/4 in Maximum Work Thickness, 4195 lb Shear Strength, 4800 lb Tensile Strength
- Consistent performance in high and low strength concrete
- Consistent performan
- Nominal drill bit size is the same as the anchor diameter
- Nominal drill bit si
- Anchor can be instal
- Anchor can be installed through standard fixture holes
- Anchor design allows
- Anchor design allows for follow-up expansion after setting under tensile loading
- Nominal drill bit di
- Length ID code and identifying marking stamped on head of each anchor
- Length ID code and i
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate
- Ultimate load capaci
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck an
- Normal weight concre
Consistent performance in high and low strength concrete
Consistent performance in high and low strength concrete
Nominal drill bit size is the same as the anchor diameter
Nominal drill bit size is the same as the anchor diameter
Anchor can be installed through standard fixture holes
Anchor can be installed through standard fixture holes
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
Anchor design allows for follow-up expansion after setting under tensile loading
Nominal drill bit diameter same as Anchor diameter
Length ID code and identifying marking stamped on head of each anchor
Length ID code and identifying marking stamped on head of each Anchor
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
Ultimate load capacity - 2240 lb tensile strength when embedded in 2500 psi, 2685 lb tensile strength when embedded in 3000 psi, 3100 lb tensile strength when embedded in 4000 psi normal-weight concrete
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials