DeWALT® 7430SD1-PWR SD1 Expansion Wedge Anchor, 5/8 in Dia, 3-1/2 in OAL, 1-1/2 in L Thread, Carbon Steel, Zinc Plated
DEWALT 7430SD1-PWR
MFG #: 7430SD1-PWR
$0.00
/ Box of 25
In Stock
- Type: Expansion
- Series: SD1, Wedge-All®
- Diameter: 5/8, 5/8 in
- Overall Length: 3-1/2, 3-1/2 in
- Thread Length: 1-1/2, 1-1/2 in, 1-7/8
- Material: Carbon Steel
- Finish: Zinc Plated
- Minimum Embedment Depth: 2-3/4, 2-3/4 in
- Head Size: 15/16
- Drill Size: 5/8, 5/8 in
- Head Type: Threaded Stud
- Thread Size: 5/8-11
- Head Style: Threaded Stud
- Thread Type: UNC
- Maximum Work Thickness: 1/8, 1/8 in
- Shear Strength: 1699, 6815
- Tensile Strength: 120, 6285
DeWALT®, 7430SD1-PWR, Expansion Wedge Anchor, Series: SD1, 5/8 in Diameter, 3-1/2 in Overall Length, 1-1/2 in Thread Length, Carbon Steel, Zinc Plated, 2-3/4 in Minimum Embedment Depth, 5/8 in Drill, 5/8-11 Thread, Threaded Stud Head, UNC Thread, 1/8 in Maximum Work Thickness, 6815 lb Shear Strength, 6285 lb Tensile Strength
- Consistent performance in high and low strength concrete
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Consistent performan
- Nominal drill bit diameter same as anchor diameter
- One-piece, wrap-around clip ensures uniform holding capacity
- Anchor can be instal
- Anchor can be installed through standard fixture holes
- Threaded end is chamfered for ease of starting nut
- Anchor design allows
- Length ID code and identifying marking stamped on head of each anchor
- Available in a wide range of diameters and lengths
- Nominal drill bit di
- Anchor design allows for follow-up expansion after setting under tensile loading
- Carbon steel ASTM A563 grade A nut
- Length ID code and i
- The minimum concrete thickness is 1-1/2 times the embedment depth
- Allowable load capac
- 35/64 in nut height
- The allowable loads are based on a safety factor of 4
- 80 ft-lbf installation torque
- 15/16 in wrench
- 11/16 in minimum fixture hole
- 11/16 in fixture clearance hole
- 90 ft-lb installation torque
- 80 ft-lbf installati
- 4520 lb at 2000 psi/8600 lb at 4000 psi ultimate tension loads and 1130 lb at 2000 psi, 16
- 11/16 in fixture cle
- 8720 lb at 2000 psi ultimate shear loads and 1620 lb at 2000 psi, 1900 lb at 3000 psi, 218
- Anchor body material meets minimum 70000 psi tensile strength
Consistent performance in high and low strength concrete
Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
Consistent performance in high and low strength concrete
Nominal drill bit diameter same as anchor diameter
One-piece, wrap-around clip ensures uniform holding capacity
Anchor can be installed through standard fixture holes
Anchor can be installed through standard fixture holes
Threaded end is chamfered for ease of starting nut
Anchor design allows for follow-up expansion after setting under tensile loading
Length ID code and identifying marking stamped on head of each anchor
Available in a wide range of diameters and lengths
Nominal drill bit diameter same as Anchor diameter
Anchor design allows for follow-up expansion after setting under tensile loading
Carbon steel ASTM A563 grade A nut
Length ID code and identifying marking stamped on head of each Anchor
The minimum concrete thickness is 1-1/2 times the embedment depth
Allowable load capacity - 1240 lb tensile strength when embedded in 2500 psi, 1360 lb tensile strength when embedded in 3000 psi, 1570 lb tensile strength when embedded in 4000 psi normal-weight concrete
35/64 in nut height
The allowable loads are based on a safety factor of 4
80 ft-lbf installation torque
15/16 in wrench
11/16 in minimum fixture hole
11/16 in fixture clearance hole
90 ft-lb installation torque
80 ft-lbf installation torque
4520 lb at 2000 psi/8600 lb at 4000 psi ultimate tension loads and 1130 lb at 2000 psi, 1640 lb at 3000 psi, 2150 lb at 4000 psi for concrete
11/16 in fixture clearance hole
8720 lb at 2000 psi ultimate shear loads and 1620 lb at 2000 psi, 1900 lb at 3000 psi, 2180 lb at 4000 psi for concrete
Anchor body material meets minimum 70000 psi tensile strength