SPF/Anvil™ 0560009193 FIG 93 Universal Wide Throat C-Clamp, 3/8 in Rod, 1-1/4 in THK Flange, 500 lb Top/250 lb Bottom lb Load, Ductile Iron, Hot Dipped Galvanized
09900750
MFG #: 0560009193
$0.00
/ Each
In Stock
- Type: Type C, Universal Wide Throat
- Series: FIG 93
- Rod Size: 3/8
- Flange Thickness: 1-1/4
- Load Capacity: 500 lb Top/250 lb Bottom, 500/250
- Thickness: 1-1/4
- Material: Ductile Iron
- Finish: Hot Dipped Galvanized
- Specifications: 60 in-lbs Torque
- Temperature Rating: 450
SPF/Anvil™ C-Clamp, Universal Wide Throat, Series: FIG 93, 3/8 in Rod, 1-1/4 in Flange Thickness, 500 lb Top/250 lb Bottom lb, 60 in-lbs Torque, Ductile Iron, Hot Dipped Galvanized, 450 deg F
- Attached to horizontal flanges of structural members in either the top beam or bottom beam
- Attached to horizont
- Secured in place by a cup-pointed set screw tightened against the flange
- Secured in place by
- A jam nut is provided for tightening the set screw against the body casting
- A jam nut is provide
- Thru tapping of the body casting permits extended adjustment of the threaded rod
- Thru tapping of the
- Wider throat for attaching to flange with up to 1-1/4 in THK
- Wider throat for att
- Recommended for use under roof installations with bar joist type constructions, or for att
- Recommended for use
- Hardened steel cup point set screw and locknut
- Hardened steel cup p
Attached to horizontal flanges of structural members in either the top beam or bottom beam positions
Attached to horizontal flanges of structural members in either the top beam or bottom beam positions
Secured in place by a cup-pointed set screw tightened against the flange
Secured in place by a cup-pointed set screw tightened against the flange
A jam nut is provided for tightening the set screw against the body casting
A jam nut is provided for tightening the set screw against the body casting
Thru tapping of the body casting permits extended adjustment of the threaded rod
Thru tapping of the body casting permits extended adjustment of the threaded rod
Wider throat for attaching to flange with up to 1-1/4 in THK
Wider throat for attaching to flange with up to 1-1/4 in THK
Recommended for use under roof installations with bar joist type constructions, or for attachment to the top or bottom flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joist or flange does not exceed 1-1/2 in
Recommended for use under roof installations with bar joist type constructions, or for attachment to the top or bottom flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joist or flange does not exceed 1-1/2 in
Hardened steel cup point set screw and locknut
Hardened steel cup point set screw and locknut