Anvil® 0500173133 FIG 260 Adjustable Clevis Hanger, 8 in Pipe, 3/4 in Rod, 2000 lb Load, Carbon Steel, Black Oxide
27712052
MFG #: 0500173133
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Type: Adjustable
- Series: FIG 260
- Pipe Size: 8
- Rod Size: 3/4
- Load Capacity: 2000
- Material: Carbon Steel
- Finish: Black, Black Oxide
Anvil® Clevis Hanger, Adjustable, Series: FIG 260, 8 in Pipe, 3/4 in Rod, 2000 lb, Carbon Steel, Black Oxide
- Hanger load nut above clevis must be tightened securely to assure proper hanger performanc
- Vertical adjustment without removing pipe may be made from 3/8 in through 5-1/8 in, varyin
- Hanger load nut abov
- Tighten upper nut after adjustment
- Vertical adjustment
- Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, th
- Tighten upper nut af
- Sizes 5 in and up have rod and two nuts instead of bolt and nut, thread length on clevis r
- Design has yoke on o
- Sizes 5 in and up ha
Hanger load nut above clevis must be tightened securely to assure proper hanger performance
Vertical adjustment without removing pipe may be made from 3/8 in through 5-1/8 in, varying with the size of clevis
Hanger load nut above clevis must be tightened securely to assure proper hanger performance
Tighten upper nut after adjustment
Vertical adjustment without removing pipe may be made from 3/8 in through 5-1/8 in, varying with the size of clevis
Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized
Tighten upper nut after adjustment
Sizes 5 in and up have rod and two nuts instead of bolt and nut, thread length on clevis rod is such that the thread locks the nuts in place and threads are not in shear plane
Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized
Sizes 5 in and up have rod and two nuts instead of bolt and nut, thread length on clevis rod is such that the thread locks the nuts in place and threads are not in shear plane