CM® M656AG Anchor Shackle, 18 ton Load, 1-1/4 in, 1-3/8 in Dia Screw Pin, Galvanized
03100656
MFG #: M656AG
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Load Capacity: 18
- Size: 1-1/4
- Pin Diameter: 1-3/8
- Pin Type: Screw
- Inner Length: 4.688
- Inner Width: 2-7/8
- Opening Size: 2.031
- Eye Outer Size: 3-1/4
- Body Material: Alloy Steel
- Pin Material: Alloy Steel
- Finish: Galvanized
CM® Anchor Shackle, 18 ton Load, 1-1/4 in Size, 1-3/8 in Pin Diameter, Screw Pin, 4.688 in Inner Length, 2-7/8 in Inner Width, 2.031 in Opening, 3-1/4 in Eye Outer, Alloy Steel Body, Alloy Steel Pin, Galvanized
- Made of special bar quality (SBQ) steel having fine grain, reduced sulfur and phosphorus
- Shackles show major deformation before failure
- Working load limit and traceability codes shown as permanent markings on body
- All shackles have alloy quenched and tempered pins
- Anchor shackles can be side loaded or used for multiple connections
- Special products engineering available to fit your special lifting, tie down and pulling n
- 5:1 design factor
Made of special bar quality (SBQ) steel having fine grain, reduced sulfur and phosphorus
Shackles show major deformation before failure
Working load limit and traceability codes shown as permanent markings on body
All shackles have alloy quenched and tempered pins
Anchor shackles can be side loaded or used for multiple connections
Special products engineering available to fit your special lifting, tie down and pulling needs
5:1 design factor