Dixon®

Dixon® Dixon Sanitary 40MP-U400 Standard Clamp Gasket, 4 in Nominal, 3-55/64 in ID x 4-43/64 in OD x 13/64 in THK, Buna-N, Domestic

13570210 MFG #: 40MP-U400
$0.00 / Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
Dixon® Dixon Sanitary 40MP-U400 Standard Clamp Gasket, 4 in Nominal, 3-55/64 in ID x 4-43/64 in OD x 13/64 in THK, Buna-N, Domestic
  • Type: Standard
  • Series: 40MP
  • Nominal Size: 4
  • Inside Diameter: 3-55/64
  • Outside Diameter: 4-43/64
  • Thickness: 13/64
  • Temperature Rating: -25 to 225
  • Material: Buna-N
  • Color: Black
  • Domestic/Import: Domestic
Dixon Sanitary Clamp Gasket, Standard, Series: 40MP, 4 in Nominal, 3-55/64 in Inside Dia, 4-43/64 in Outside Dia, 13/64 in Thickness, -25 to 225 deg F, Buna-N, Black, Domestic
QTY
Add to List
  • Color code - red dot
  • Color code: red dot
  • Passed USP class VI
  • Peroxide cured
  • Passed USP class VI cytotoxicity testing
  • Gasket material appr
  • Peroxide cured const
  • Peroxide cured construction
  • Psi service ratings
  • Gasket material approved by (3A), USDA
  • PTFE gaskets, when u
  • Psi service ratings for the sanitary clamps do not apply to connections (1 in and above) u
  • This restriction doe
  • PTFE gaskets, when used with any clamp, are likely to leak at pressures far below the publ
  • This restriction does not apply to the fractionally sized 1/2 in and 3/4 in connections, d
Color code - red dot
Color code: red dot
Passed USP class VI cytotoxicity testing
Peroxide cured
Passed USP class VI cytotoxicity testing
Gasket material approved by (3A), USDA
Peroxide cured construction
Peroxide cured construction
PSI service ratings for the sanitary clamps do not apply to connections (1 in and above) using any PTFE gaskets, due to the potential for cold flow under normal operating conditions
Gasket material approved by (3A), USDA
PTFE gaskets, when used with any clamp, are likely to leak at pressures far below the published service ratings
Psi service ratings for the sanitary clamps do not apply to connections (1 in and above) using any PTFE gaskets, due to the potential for cold flow under normal operating conditions
This restriction does not apply to the fractionally sized 1/2 in and 3/4 in connections, due to their recessed, fully contained design
PTFE gaskets, when used with any clamp, are likely to leak at pressures far below the published service ratings
This restriction does not apply to the fractionally sized 1/2 in and 3/4 in connections, due to their recessed, fully contained design