DeWALT® 7448SD1-PWR SD1 Expansion Wedge Anchor, 3/4 in Dia, 8-1/2 in OAL, 6 in L Thread, Carbon Steel, Zinc Plated
DEWALT 7448SD1-PWR
MFG #: 7448SD1-PWR
$0.00
/ Box of 10
In Stock
- Type: Expansion
- Series: SD1
- Diameter: 3/4
- Overall Length: 8-1/2
- Thread Length: 6
- Material: Carbon Steel
- Finish: Zinc Plated
- Minimum Embedment Depth: 3-3/8
- Drill Size: 3/4
- Head Type: Hex, Threaded Stud
- Thread Size: 3/4-10
- Head Style: Hex
- Thread Type: UNC
- Maximum Work Thickness: 4-3/8
- Shear Strength: 12580, 12685
- Tensile Strength: 7860, 9075
DeWALT®, 7448SD1-PWR, Expansion Wedge Anchor, Series: SD1, 3/4 in Diameter, 8-1/2 in Overall Length, 6 in Thread Length, Carbon Steel, Zinc Plated, 3-3/8 in Minimum Embedment Depth, 3/4 in Drill, 3/4-10 Thread, Threaded Stud Head, UNC Thread, 4-3/8 in Maximum Work Thickness, 12580 lb Shear Strength, 9075 lb Tensile Strength
- Consistent performance in high and low strength concrete
- Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
- Consistent performan
- One-piece, wrap-arou
- Nominal drill bit size is the same as the anchor diameter
- One-piece, wrap-around clip ensures uniform holding capacity
- Nominal drill bit si
- Anchor can be instal
- Threaded end is cham
- Anchor can be installed through standard fixture holes
- Threaded end is chamfered for ease of starting nut
- Anchor design allows
- Available in a wide
- Anchor design allows for follow-up expansion after setting under tensile loading
- Available in a wide range of diameters and lengths
- Nominal drill bit di
- Carbon steel ASTM A5
- Length ID code and identifying marking stamped on head of each anchor
- Carbon steel ASTM A563 grade A nut
- Length ID code and i
- The minimum concrete
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate
- The minimum concrete thickness is 1-1/2 times the embedment depth
- The allowable loads
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck an
- The allowable loads are based on a safety factor of 4
- Normal weight concre
- 7/8 in minimum fixture hole
- 150 ft-lb installation torque
- 6760 lb at 2000 psi, 9960 lb at 4000 psi ultimate tension loads and 1690 lb at 2000 psi, 2
- 11360 lb at 2000 psi ultimate shear loads and 2840 lb at 2000/3000/4000 psi for concrete
- Anchor body material meets minimum 70000 psi tensile strength
Consistent performance in high and low strength concrete
Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
Consistent performance in high and low strength concrete
• One-piece, wrap-around clip ensures uniform holding capacity
Nominal drill bit size is the same as the anchor diameter
One-piece, wrap-around clip ensures uniform holding capacity
Nominal drill bit size is the same as the anchor diameter
Anchor can be installed through standard fixture holes
• Threaded end is chamfered for ease of starting nut
Anchor can be installed through standard fixture holes
Threaded end is chamfered for ease of starting nut
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
• Available in a wide range of diameters and lengths
Anchor design allows for follow-up expansion after setting under tensile loading
Available in a wide range of diameters and lengths
Nominal drill bit diameter same as Anchor diameter
• Carbon steel ASTM A563 grade A nut
Length ID code and identifying marking stamped on head of each anchor
Carbon steel ASTM A563 grade A nut
Length ID code and identifying marking stamped on head of each Anchor
• The minimum concrete thickness is 1-1/2 times the embedment depth
Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
The minimum concrete thickness is 1-1/2 times the embedment depth
• The allowable loads are based on a safety factor of 4
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
The allowable loads are based on a safety factor of 4
Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
7/8 in minimum fixture hole
150 ft-lb installation torque
6760 lb at 2000 psi, 9960 lb at 4000 psi ultimate tension loads and 1690 lb at 2000 psi, 2090 lb at 3000 psi, 2490 lb 4000 allowable tension load psi for concrete
11360 lb at 2000 psi ultimate shear loads and 2840 lb at 2000/3000/4000 psi for concrete
Anchor body material meets minimum 70000 psi tensile strength