Simpson Strong-Tie® DIA50SS Threaded Drop-In Anchor, 1/2 in, 5/8 in Drill, 303/304 Stainless Steel, 2 in D Min Embedment
08312304
MFG #: DIA50SS
$0.00
/ Each
Item currently not in stock. Lead time based upon availability from the manufacturer.
- Type: Threaded
- Bolt/Rod Size: 1/2
- Thread Size: 1/2-13
- Material: 303/304 Stainless Steel
- Drill Size: 5/8
- Minimum Embedment Depth: 2
- Thread Length: 3/4 in
- Thread Type: UNC
- Overall Length: 2 in
- Shear Strength: 1750 lb at 2000 psi/3000/4000 psi for Concrete
- Tensile Strength: 830 lb at 2000 psi, 1178 lb at 3000 psi, 1525 lb at 4000 psi for Concrete
- Finish: Zinc Plated
Simpson Strong-Tie® Drop-In Anchor, Threaded, 1/2 in Bolt/Rod, 1/2-13, 303/304 Stainless Steel, 5/8 in Drill, 2 in Minimum Embedment Depth, 3/4 in Thread Length, UNC, 2 in Overall Length, 1750 lb at 2000 psi/3000/4000 psi for Concrete Shear Strength, 830 lb at 2000 psi, 1178 lb at 3000 psi, 1525 lb at 4000 psi for Concrete Tensile, Zinc Plated
- Lipped edge (DIAS) eliminates need for precisely drilled hole depth
- Available in coil-thread version for 1/2 in and 3/4 in coil-threaded rod
- 2600 to 2700 deg F freezing/melting point
- Anchor body AISI 303 meets chemical requirements of ASTM A582
- AISI 303 expander plug
- The allowable loads are based on a safety factor of 4
- The minimum concrete thickness is 1-1/2 times the embedment depth
Lipped edge (DIAS) eliminates need for precisely drilled hole depth
Available in coil-thread version for 1/2 in and 3/4 in coil-threaded rod
2600 to 2700 deg F freezing/melting point
Anchor body AISI 303 meets chemical requirements of ASTM A582
AISI 303 expander plug
The allowable loads are based on a safety factor of 4
The minimum concrete thickness is 1-1/2 times the embedment depth